SwissLas PL-32.000G

The Laserworld PL-32.000G high-end laser projectors offer a very innovative technology - the all-round solution for every professional application with extra high-performance and razor-sharp rays. This extremely powerful high-end laser projector are brand-new in our product range and it is one of the most powerful devices of the Purelight Series. The PL-32.000G laser projectors are equipped with green DPSS laser modules.

Equipped with scanners with ca. 30kpps@8°, this unit is great for doing graphics. The scanning has a good angle stability, so not only simple graphics projections look fine!


At the back of the unit there is a trim pot for the color, so the color balance can be quickly adjusted.

For easy maintenance, the top cover can easily be removed by only loosening six screws.

Power typ.: 33'500mW
Guaranteed at Aperture: 30'000mW
Power Red: 
Power Green: >32'000mW / 532nm
Power Blue: 
Beam Specs (full angle): ca. 6mm / 1.5mrad
Laser Sources: DPSS Laser
Laser Class 4
Operation Modes: ILDA; optional DMX, LAN, SD-card
Scanner: ScannerMax 506 scanner system, ca. 30kpps@8°ILDA; as upgrade available: CT-6215H, >35kpps@8° ILDA
Scan Angle Max. 60° max.
Basic Patterns: 
Access.: Allen key, case, powercable, manual
Power Supply: 110V - 220V AC 50/60Hz
Dimensions: 35.7/10.3/6.7 in
Weight: 81.6 lbs

Laser Class 4 show laser light device. In the USA you must consider the laser safety regulations of the CDRH.
This product has a valid variance for legal sale in the United States. 
On purchase, we will do the required variance paperwork together with you, which only takes 3 minutes.

Features - 

• Total Power typical: 33'500mW.
• Guaranteed power guaranteed at aperture: 30'000mW.
• Beam Specifications (full angle): ca. 6mm / 1.5mrad.

For Detail

Click –SwissLas PL-32.000G

10mm 2 - conductor Quick Splitter LED Strip Connector for 5050 Single Color Strip Lights , Strip to Strip

This is an extremely easy to use connector for 5050 single color LED strip light. No matter if you're professional or not, you can easily handle it. It can be used as strip-to-strip connector and save you plenty of time on soldering electric cables.

--For waterproof strip light: you need to sweep off the silicon first(be aware not to cut through the circuit board). Then open the connector and lock the strip under the plate.

--For non-waterproof strip light: just cut the strip as you need (cut every 3 LEDs), then open the connector and lock the strip under the plate.

Everything finished in a few minutes without soldering. BTW, make sure to match the positive(+) and negative(-) marks on both strips.

If you feel there is a loose connection, thicken your strip light by adding an extra chip in between and make sure the conductors built in the connection boxes touch your strip light tightly.

Package includes

1 × 10mm dual connector cable.

For Detail

Click –

10mm 2-conductor Quick Splitter LED Strip Connector for 5050 Single Color Strip Lights, Strip to Strip

AVM - Ovation MA8 Mono-Poweramp

The OVATION MA8 delivers nearly any desired power level even into critical loudspeakers without loss of control. Far over 1000 Watts into 4 Ohms are surely sufficient for reproduction of any kind of music even when listening at original sound levels. Nevertheless this amplifier can also play at moderate levels without loosing precision or missing even finest details.

The OVATION MA8 has been developed to satisfy even highest demands on reproduction of music. Forget about noise and distortion and enjoy it's warm and powerful music reproduction – regardless which loudspeaker you use.

It's excellent musical quality comes together with a very worthy finish: The case is totally made of aluminum. The power transformers inside (2 x 1000 VA, 2 x 120 VA) are mounted into a shielding case that ensures that no mechanical hum or electrical stray fields can influence the electronic circuitry of the amplifiers.

FEATURES:

The power supply consists of two 200.000 uF Capacitor banks. The power amplifier itself is a balanced construction. That means two amplifiers in bridge connection. Each of the power amps has it's own transformer and capacitor bank. The amplifiers use 24 output-FETs each and thus are able to deliver over 180 amperes - if needed. The input circuitry is also a balanced construction and offers RCA-Cinch (WBT-socket) and as well balanced XLR (Neutrik) inputs. The speaker terminals are finest WBT 0705 NEXT GEN sockets, naturally in bi-wiring configuration.

Besides that we have built in a brilliant blue VF display which informs you about the actual power (power bar) and the peak power (numeric). It is also useful to make settings via the intuitive menu system: Configuring the display (power bar & value display, peak power only and display off).

For Detail

Click -
AVM - Ovation MA8 Mono-Poweramp

Laserworld Laser PS-18.400RGB compact ILDA 18,4 Watt RGB

The brand-new Pure Sapphire Compact Series comes with a new and extremly small housing (26x26x17cm) which is very versatile and has been completely manufactured in Switzerland. This Swiss quality system is equipped with high end SwissLas diode modules and has an optimized beam shape. Fast Xscan galvos assure great beam shows - indoor and outdoor. The devices can be controlled through ILDA. All units have trim pots on the rear side of the device to adjust color balance and x/y shift. The new Pure Sapphire Compact Series will definitely fascinate you.CT scanner also available as upgrade.

FEATURES:

• total power: min. 14000mW, max. 18400mW.
• red: > 2000mW/640nm.
• green: > 4000mW/532nm.
• blue: > 8000mW/445nm.
• laser sources: laser diodes, green DPSS laser.
• Laser class: 4 - EN 60825-1 2007.
• working mode: LAN, auto, DMX, ILDA, SD-card, W-DMX.
• XScan 50kpps@4°, as upgrade optional available: Xscan 60 - 60kpps or CT-6210HP - 70kpps.
• Scan angle: max. 60°.
• beam properties: ca. 4mm / <1.9mrad.
• Power supply: external 24V DC for 100-240V AC 50/60Hz.
• power consumption: ca. 300W.
• Laser safety according to EN 60825: overload protection at X and Y galvo, Advanced Scan Fail Safety.

SCOPE OF SUPPLY -

• 1 x device.
• 1 x external PSU.
• 1 x manual.

DIMENSIONS -

• ca. 260x260x170mm.
• weight: ca. 9kg.

For Detail

Click -

Laserworld Laser PS-18.400RGB compact ILDA 18,4 Watt RGB